The main engine of the plastic granulator is an extruder, which consists of an extrusion system, a transmission system and a heating and cooling system.
The waste plastic granulator is a device that produces plastic granules by extruding, cooling and dicing polyethylene (greenhouse films, beverage bottles, lining bags, etc.) or polypropylene (old woven bags, packaging bags, binding ropes, etc.) , the particles produced are widely used.
The waste plastic recycling granulator is matched with the crushing cleaning machine and the granulator. The crushed and cleaned plastic can be directly put into extrusion granulation without drying it. The process is simple, the technology is advanced, and it is suitable for different waste plastics. Adopt automatic temperature control, (coal) electric heating, less electricity consumption, no pollution, and high degree of automation. The complete set of equipment consists of the main engine, a complete set of crushing and cleaning machines, a granulator, a cleaning tank (can be self-made), and a cooling tank (can be self-made). It can be directly granulated without drying after washing, and the granulation is clean, free of pollution and aging, which greatly reduces the production cost and improves the production efficiency. The whole machine has the remarkable characteristics of small size, high efficiency, good performance, low power consumption, high quality of finished products and wide adaptability, which can be adapted to meet various processing requirements.
The plastic granulator has to bear various dynamic loads from the day it is put into production. Due to wear, corrosion, unreasonable operation and poor maintenance of various parts, their performance and efficiency will decline after working for a period of time. The purpose of maintaining the plastic granulator including plastic crusher granulator is to extend its working life and ensure that the plastic granulator can work under normal conditions.
①Daily maintenance: The daily maintenance is regular, the maintenance of the operator of each production shift, such as: checking the equipment when taking over, refueling and lubricating, scrubbing the oil of the equipment, tightening the loose nuts, etc.
②Regular maintenance: The regular maintenance of the plastic machine is normally once a year. Usually before the holiday, set aside a few days. This work is coordinated by maintenance workers and operators, and equipment technicians participate in the maintenance of equipment.